Nordcap MINI-CREAM Série Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
QUICK FROSTING
SWITCHER (if present): to use it press the
continuously working .
ALARM SPOT LIGHT (if present): its red and, if on, means that the Temperature inside the unit is not cold enough and this could be for
the following reasons:
The unit has just been started
The door has been open or not properly closed
It has just been putted in a food stuff to be frozen
After about 15-20 minutes when the unit will reach the right set temperature the light will get off automatically.
ON LINE SPOT LIGHT (if present): it's green, and it shows that the unit is perfectly connected to the electric feeding line.
TEMPERATURE GAUGE: the temperature inside the cabinet in different models can be indicated by a thermometer, or an electronic
thermostat that also allows its adjustment. In the last case please follow specific instructions included in thermostat instruction booklet.
ELECTRIC LINE SWITCH (if present) : it allows to turn on and off the appliance after plugging in the wall outlet.
INNER VENTILATION SWITCH (if present): connects or disconnects the fan inside the tank. For a proper functioning of the cabinet,
keep the fan always working except in case of too long door opening (i.e. in case of products storage).
THERMOSTAT KNOB (if present): it is foreseen if there isn't an electronic thermostat. To achieve an optimum conservation, it must be
set in a medium position. To achieve a warmer temperature, turn the thermostat knob anticlockwise, that is toward the lower numbers,
while to obtain a colder temperature turn it toward the higher numbers.
ELECTRONIC THERMOSTAT (DIGITAL) (if present): please consult the papers (thermostat instruction booklet) you'll find inside the
cabinet.
LIGHT SWITCH (if present): it allows to switch the lights on and off, with the symbol (II) it switches on the lights in the cabinet, with
the symbol (I) it switches on the lights in the bin;
DEFROSTING TIMER (if present): it is used to program the defrosting (duration, number of interventions).
CONTROLS
orange switcher that once lightened make the compressor

Publicité

Table des Matières
loading

Table des Matières