Publicité
Les langues disponibles
Les langues disponibles
S
MART SET OPERATION
A simplifi ed set back function enables to recall the preferred (preset) setting with
a single push of the
button. Press the button again and you can go back to
the previous setting in an instance.
1
Press
during COOL, or HEAT mode to select
SMART SET mode.
2
Set the temperature, fan speed, and airfl ow direction.
• The same setting is selected from the next time by simply pressing
.
• Two settings can be saved. (One for COOL, one for HEAT)
• Select the appropriate temperature, fan speed, and airflow direction
according to your room.
Press
again to cancel SMART SET operation.
• SMART SET operation also is cancelled when the MODE button is
pressed.
Note:
Example of use:
1. Low energy mode
Set the temperature 4°F (2°C) to 6°F (3°C) warmer in COOL and cooler in
HEAT mode. This setting is suitable for unoccupied room, and while you are
sleeping.
2. Saving frequently used settings
Save your preferred setting for COOL and HEAT. This enables you to select
your preferred setting with a single push of the button.
E
CONO COOL OPERATION
Swing air fl ow (change of air fl ow) makes you feel cooler than constant air fl ow.
The set temperature and the airfl ow direction are automatically changed by the
microprocessor. It is possible to perform cooling operation with keeping comfort.
As a result energy can be saved.
1
Press
during COOL mode
ECONO COOL operation.
The unit performs swing operation vertically in various cycles according
to the temperature airflow.
Press
again to cancel ECONO COOL operation.
• ECONO COOL operation also is cancelled when the VANE button is
pressed.
pages 5, 6
to start
En-8
Publicité
