LAVOR Pro QUICK 36E Mode D'emploi page 35

6.1 HANDLEBAR POSITIONING
To place the machine handlebar in the working po-
sition (handlebar opened) it is necessary to operate
the handlebar release pedal ( Photo 9 - A );
press the pedal, pull the handlebar upward and
place it in the working position wished.
The handlebar can be set in three fixed positions:
one "handlebar closed" position for the machine
storage or the machine transportation in a car (
Photo 10 ) and two "handlebar opened" working
positions ( Photo 11 and Photo 12).
Photo 11
Handlebar opened - middle position.
To operate in small spaces it is recom-
mended to set the handlebar in this
position.
6 - INSTALLATION INFORMATIONS
A
Photo 9
Photo 10
Handlebar closed position
Photo 12
Handlebar opened
35