Care & Maintenance - Varan DLM104 Manuel D'utilisation

IMPORTAN
Assembly Instructions
Place the stabilizer bar into the end of the side rails(see diagram).
1.
Secure the stabilizer bar with the nut and bolt.
2.
Care&Maintenance
The hinges should be lubricated with a good quality lubricant
1.
to ensure mobility.
The hinges should be cleaned after use especially when the
2.
hinges have ben subjected to dust or dirt.
Clean the area,or wash with warm water.
3.
However should water be used on the the hinges,pIease
4.
remember to re-lubricate after drying.
Important:This ladder should never be used if any part is missing,
damaged or worn.
Following the above instructions will help to maintain your
appliance and ensure its maximum lifespan.
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
ers must be fitted before use
Hinges
To unlock the hinges simply move the handle to the position(see
1.
diagram) and then fold the ladder section inward.
The hinges will automatically lock into position once the ladder
2.
is unfolded.
Always check that all hinges are securely locked into position
3.
before using the ladder.
Each pair of hinges must be locked simultaneously.
4.
It is extremely dangerous to attempt to alter the positioning of the
5.
Iadder,hinges or operationg joingts while the ladder is in use.
Always keep the joints clean and fre from all foreign materials,
6.
it is advisable to cover the joints during exceptionally messy jobs.
L-LOCK
O-UNLOCK
CAUTION
To open the ladder section:
Place the locking pin(bIack)to the
"O"position
.
The ladder is locked when ladder in
"L"position.
T: 00352/26908036 – F: 00352/26908040
DLM104
DLM206
DLM105
HINGES WILL LOCK
FIRMALY IN PLACE