Witter VW72 Notice De Montage

Fitting
Instructions
MATERIALS
A 1 Mainframe
B 1 Coupling spacer
D 4 M12 x 45mm x 1.5mm 10.9 grade Bolts, Flat Washers and Spring Washers
E 3 M5 x 40mm Bolts
CB 2 M16 x 60 x 2.0 Bolts, Nuts and Lock Washers
Note: This towbar must be used with either a Witter Towball (part number Z11) or Class A50-1 or A50-X towball, which
dimensionally conforms to A50-1 with a 'D' and 'S' value greater than or equal to that of the towbar. – may also be used with a Z52B
adjustable and a type approved universal coupling.
FITTING
Loosely attach Mainframe (A) to lower face of bumper beam using bolts (D).
1.
Ensuring Mainfarme (A) is aligned correctly with bumper fully tighten all bolts. (120Nm).
2.
Bolts (E) are supplied to enable fitment of electrical socket.
3.
Recommended torque settings:
M16 - 200 Nm Grade 10.9: M12 – 120Nm
W0001VW72-FIT$011106270000ÌÄ
W0001VW72-FIT$011106270000
For VW Amarok fitted with factory
Bumper step
VW72
TOWBAR
2011-