Publicité
ENG
Key combinations
FN + Windows key = Lock/Unlock windows key
FN + I = Print Screen
FN + O = Scroll Lock
FN + P = Pause Break
FN + J = Ins
FN + K = Home
FN + L = End
FN + 1 = F1
FN + 2 = F2
FN + 3 = F3
FN + 4 = F4
FN + 5 = F5
FN + 6 = F6
FN + 7 = F7
FN + 8 = F8
FN + 9 = F9
FN + 0 = F10
FN +
= F11
FN +
= F12
FN +
= Decrease volume
FN +
= Increase volume
FN +
= Sound off/on
FN + right ALT GR = Windows menu key
Caps lock + Any other keyboard key = Caps lock
will function like the FN key. For example,
pressing Caps lock + 1 = F1. This function can
be deactivated or activated by pressing FN +
Left Alt.
FN + ESC press and hold for about 3 seconds =
Factory reset.
Press and hold FN + R for 3 seconds to pair
with USB receiver. Please note that the
receiver has been paired already and this is
only for troubleshooting
Battery
Battery indicator: check the battery level by
pressing FN + Backspace, the keys from 1 to 0
will be green (wireless only).
100% battery = 1,2,3,4,5,6,7,8,9,0 will be
green.
75% battery = 1,2,3,4,5,6,7,8 will be green.
50% battery = 1,2,3,4,5 will be green.
25% battery = 1,2,3 will be green.
LED combinations
FN + right CTRL = Change backlight mode
FN + right SHIFT = Change backlight colour
FN + page down = Change to static colour (mode)
FN + down arrow = Decrease backlight brightness
FN + up arrow = Increase backlight brightness
FN + right arrow = Increase backlight speed
FN + left arrow = Decrease backlight speed
LED modes
There are 5 backlight speeds. 3rd speed is
default. The arrow keys will flash 3 times when
it reaches lowest or highest speed.
There are 5 brightness settings (100%, 75%,
50%, 25% and off). 100% is default. The arrow
keys will flash 3 times when it reaches lowest
or highest brightness.
The keyboard has 20 LED modes in total (Not
counting software modes).
Caps lock and Win lock will be static red when
they are activated.
Connect
Use the switch underneath the keyboard to
switch between Bluetooth, wired and USB
receiver.
= Wired connection and off
Switch to the middle
(if cable is disconnected).
Wired connection: Use a USB-C cable to connect
with a wired connection.
= 2.4 GHz wireless
Switch to the right
connection to USB receiver.
1. The ESC key will flash green to indicate
pairing mode (USB receiver).
2. Connect the USB receiver to your device.
The keyboard will connect automatically.
3. Once connected successfully it will stop
flashing.
Switch to the left
= Bluetooth.
With Bluetooth you can connect up to 3
devices.
Quick press FN + Q/W/E =
between 1, 2 or 3.
1. The ESC key will flash blue slowly to
indicate Bluetooth mode (the ESC key will flash
fast to indicate pairing mode).
2. Press and hold FN + Q for 5 seconds = Pair
Bluetooth device 1.
Press and hold FN + W for 5 seconds = Pair
Bluetooth device 2.
Press and hold FN + E for 5 seconds = Pair
Bluetooth device 3.
3. Once connected successfully it will stop
flashing.
The keyboard will connect automatically to
devices it has been connected to previously.
When switching to Bluetooth from wired or
wireless 2.4G connection, the ESC key will
flash blue if the connection was successful.
Note: With Bluetooth 4.0 or higher 2 names
will be displayed. You can connect to any, but
Quickly switch
3
Publicité
