HEDÜ C034 Mode D'emploi page 10

Notes
1.
Woods which are to narrow for
the sensors cannot be
measured.
2.
Press the front side of the
sensors against the wood. At a
rough surface you have to
press stronger..
3.
The wood to be measured shall
have at least a thickness of 5
cm. Otherwise put several
boards on each other and
measure the stack.
4.
Wipe off water drops of the
wood surface.
5.
Possibly the water is not
spread out evenly in the wood.
Therefore measuring in
different areas can bring other
results. Please measure at all
areas and determine the
average value.
6.
The salt content of seawater
influences the result to go up.
10