Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10. Specifications
CB Channels
CB Frequency Range
Weather Channels
Weather Frequency Range
Receive Frequencies
CB/Weather
Frequency Control
Operation Temperature
Range
Channel Display
Power Source
Dimensions
Weight
Receiver
Transmitter
Noise and Interference: Motorcycle audio systems are by their very
nature noisy. While we do not guarantee this system to be com-
pletely free from electrical noises and interference, we have taken
many steps to achieve that goal: the power supply system is well
filtered and the cables associated with the unit are shielded.
Most modern day motorcycles have resistor-type spark plugs installed
by the factory. It may be necessary to insure that resistor-type spark
plugs are installed on your motorcycle.
Care, Cleaning and Protection: Your JMCB-2003K unit has been
designed to withstand most weather conditions likely to be encoun-
tered in the motorcycle riding environment.
This unit is NOT however designed to be submerged or to withstand
a high pressure spray from commercial car wash nozzles and the
warranty will be void on any unit that has been subjected to these
conditions.
The included slip-on elastic cover should be installed over your JMCB-
2003K unit when washing your motorcycle or whenever your motor-
cycle will be left out in the weather or direct sunlight for extended
periods of time.
To clean your JMCB-2003K, use a soft damp cloth and avoid any
harsh cleaning solvents or abrasives, as these may damage the finish
or structural integrity of your CB unit.
40
26.965 to 27.405 MHz
10
162.550 MHz - 163.275 MHz
Phase locked loop (PLL) synthesizer
– 4°F to +122°F
Liquid crystal display (LCD)
13.2V DC
6.5" x 3" x 1.75"
(165.1 mm x 76.2 mm x 44.5 mm)
.8 lb
AM dual conversion superheterodyne
4 watts (maximum FCC allowable)
—5—
Publicité
Table des Matières
