Saba CB3221NFIL Mode D'emploi page 25

3� Take off the middle hinge by removing the screws. Lift the
lower door and place it on a padded surface to prevent it
from scratching.
Remove the screws' covers and place them to the opposite
side.
Swap the position of the plastic tube and hole cover on top
of the lower door. Remove the door block, screw and plastic
tube under the lower door and move them to the opposite
side. You may need to replace the door block to fit the
opposite side.
GB
46
4� Remove the lower screws and lower hinge from the unit
bottom� Reverse the lower hinge, move and secure it with
the lower screws to the opposite side of the unit bottom�
Carefully set the lower door back into place, inserting it onto
the lower hinge�
5� Reverse the middle hinge� Screw the middle hinge onto the
opposite side of the unit�
GB
47