Panasonic FZ-40 Serie Manuel D'instructions page 29

2
2
C
1
3
A
D
B
C
D
2 Open the display
A Push the top of the latch (C) to release it.
B Hold the side/handle of the computer with either of your
hands and then lift up the display to open.
3 Connect your computer to a power outlet
A Connect the power cord and AC adaptor.
Hold the plug (D) of the power cord, and securely insert it
straight to the end.
B Slide the cover.
C Connect the AC adaptor to the DC-IN jack (E) of the com-
puter.
D Connect your computer to a power outlet.
The shape of AC Plug and AC Outlet depend on the
country.
The battery charging starts automatically.
E
IMPORTANT
l Do not disconnect the AC adaptor until the first-time opera-
tion procedure is completed.
l When using the computer for the first time, do not connect
any peripheral device (including wired LAN cable) except the
battery pack and AC adaptor.
l Handling the AC adaptor
Problems such as sudden voltage drops may arise during
periods of thunder and lightning. Since this could adversely
affect your computer, an uninterruptible power source (UPS)
is highly recommended unless running from the battery pack
alone.
l When the DC plug is not connected to the computer, dis-
connect the AC cord from your electrical outlet. Power is
consumed simply by having the AC adaptor plugged into an
electrical outlet.
29