Table Des Matières; Introduction; Product Description - HTC D 10 Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................5
Assembly........................................................................ 6
Operation........................................................................ 7
Maintenance................................................................... 9

Product description

The product is a single phase dust extractor. Dust-laden
air goes through the suction hose into the inlet valve.
The product separates the dust particles from the air.
The particles falls into the plastic bag at the bottom of
the product.
Product overview D 10
2
1
4
5
6
7
1. Pre-filter
2. Jet Pulse Handle
3. HEPA filter
4. Hose lock
5. Inlet plug
2
Contents
Troubleshooting............................................................ 10
Transportation, storage and disposal........................... 11
Technical data.............................................................. 11
EC Declaration of Conformity....................................... 13

Introduction

Intended use
The machine is designed for vacuuming and separating
dry, non-combustible dust with an explosion limit value
of >0.1mg/m
3
6. Longopac connection
7. Longopac holder
8. Manometer
9. ON/OFF
10. Toggle fastener
3
. Do not use the product for other tasks.
11
10
8
9
1
0
Auto
949 - 002 -