Frigidaire EFR331 Mode D'emploi page 7

OPERATION
3
Install the leveling foot and the bottom hinge backet on the new bottom side. Then
tighten the bottom hinge bracket.
4
Slot the appliance door into the bottom hinge pin. Replace the upper hinge bracket on the new side
and check the fitting between the door/hinge moving smoothly. Then tighten the screws of the
upper hinge bracket. Replace the hinge cover and the right side screw covers. Then tighten the
the top hinge cover.
5
Check that the door is aligned horizontally and vertically and that the seals are closed on all sides
before finally tightening the upper hinge. Readjust the leveling feet.
06