BL1004V1-EI-A
4 MP IP bullet camera
/ Caméra balle IP 4 MP
Quick Start Guide
/ Guide rapide
(a)
Unpack
/ Déballer
Subject to modification. Actual product and accessories may differ in appearance.
Sujet à modifications. Les produits et accessoires peuvent être différents.
Point camera
/ Pointer la caméra
1. Pan / Pan
2. Tilt / Incliner
3. Rotate / Rotation
2
Zoom
1. Loosen / desserrer
Focus
2. Adjust (for good image) / ajuster
3. Fasten / fixer
© Siqura B.V. 2017
Version 1.0 (171105-1.0)
BL1004V1-EI-A QSG (MW16)
Find additional manuals, the datasheet, the EU Declaration of
Conformity and the latest firmware for this product at:
Plus d'information sur le site ci-dessus.
Connect
/ Connecter
Use DHCP server
DHCP:
1
3
IP = 10.x.y.z
http://www.tkhsecurity.com/support-files
/ Utiliser un serveur DHCP
IP = 10.x.y.z
Switch
IP = 10.x.y.z
DHCP
Reset button & microSD
/ Bouton reset & microSD
1.
Remove sunshield / Démontez le pare-soleil.
2.
Unscrew the front cover / Dévissez le capot avant.
*Reset button:
Press and hold for 10 sec. when powering on or rebooting.
Warning: Restores factory default settings, including IP address, user name and
password!
*Bouton reset: Appuyer et maintenir 10 sec lors de l'allumage ou du reboot.
Attention: La remise a zéro usine supprime l'adresse IP et les mots de passe!
Use fixed IP address
/ Utiliser une adresse fixe
DHCP:
Switch
30 s
IP = 192.168.1.x
2 ~ 253
DHCP
Use Device Manager (see next) to discover the camera on the network.
Utiliser le "Device Manager (voir ci-après), pour retrouver la caméra sur le réseau.
Reset button*
Bouton reset*
Micro SD/SDHC/SDXC
Up to 128 GB
/ jusqu'à 128Go
IP = 192.168.1.x
http://www.tkhsecurity.com
http://www.tkhsecurity-usa.com