Koenig KFF 400-M Mode D'emploi page 17

Cleaning and care
Caution
Before cleaning, always let the product come
to a complete stop and disconnect it from
the mains.
Please follow the dissambly instruction below.
1. Open the clips.
2. Uninstall the screw and nut to unlock the
guard.
3. Take off the front guard from the rear
guard.
4. Uninstall the screw from the groove.
5. Remove the fan blade from the motor
shaft.
6. After cleaning, assemble the fan in reverse
order of dissambly steps.
• Use a soft piece of cloth for cleaning. If the
dirt or contamination proves hard to remove,
use mild detergent.
• Do not use solvents or abrasives, metal
utensils or hard brushes for cleaning.
• Do not immerse the fan in water or other
liquid. Do not allow water to drip on or into
the fan motor housing.
• Dry all parts thoroughly before storage.
• Store the product in a cool, dry and clean
place, out of the reach of children and pets.
KFF400M_A5_121205.indb 15
Do not dispose of this appliance as
unsorted municipal waste. Return it
to a designated collection point for
the recycling of WEEE. By doing so, you will
help to conserve resources and protect the
environment. Contact your retailer or local
authorities for more information.
EN
15
5/12/12 4:53 PM