Safety Precautions - König Electronic CMP-WNROUT20+40 Mode D'emploi

7. Start up the PC/laptop and wait until it has completely booted.
8. Open your browser and navigate to http://192.168.0.1.
9. Enter user name and password (both by default: admin).
10. Navigate to the Setup Wizzard and click on Auto Detect.
11. Now click on Next and in the following screen click on Apply.
12. Navigate to the menu WLAN settings and ensure that Enable Wireless is checked.
13. Here you can configure your network name (SSID) and the channel.
14. Navigate to the submenu Security Settings and select the security type. We recommend to always select Mixed
WPA/WPA2 – Personal.
15. Select WPA Algorithms as TKIP&AES.
16. Change the password in the field Pass Phrase. We recommend selecting a strong password consisting of letters,
numbers and possibly 1 or more special characters.
17. Click on Apply to store the data.
18. Exit the browser screen; your wireless network and security settings are completed. Optionally you can disconnect
the cable between router and PC/laptop to make a wireless connection (if the PC/laptop is equipped with a wireless
receiver).

Safety precautions:

Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to
incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby
recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should not be
mixed with general household waste. There is a separate collections system for these products.
Kapitel 1: Einleitung
1.1 LED-Anzeigen und Ports
Beschreibung der LED-Anzeigen auf der Frontblende: (von links nach rechts)
• POWER
Leuchtet grün, wenn Spannungsversorgung angeschlossen ist.
• SYS
Blinkt grün, wenn das System einwandfrei läuft.
To reduce risk of electric shock, this product should ONLY be opened by an authorized
technician when service is required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
DEUTSCH
Frontblende und LED-Anzeigen
7