PEAKnx Controlmini Notice Abrégée page 13

Introduction
Introduction
The following instructions explain how to set up a Gira door station with your PEAKnx touch
panel.
Setting up a daily restart on the panel
To ensure smooth operation of the Gira TKS with the Controlmini / Control 12, the panel must
be restarted once a day. Use the TecTool for this purpose. You will find further information on
setting up the TecTool in the
▪ On the TecTool interface, under "Auto Reboot", select a time at which the reboot should take
place.
Click on the save symbol in the upper right corner of the TecTool.
▪
TecTool Quickstart.
13