Button Functions - Panasonic Lumix DMW-FL580L Manuel D'utilisation

Control panel display
[ SL AUTO]
[ SL MANUAL]
[ MULTI]

Button Functions

Button
Adjust flash level by up to w5 EV.
This value is combined with
[ ] adjustments to flash
compensation made using the
camera.
Adjust the lighting angle manually.
[ZOOM]
[M] appears in the display.
Manually turn the LED light on or
[ ]
off.
[TEST/ To fire a test flash, press the [TEST/CHARGE] button while the [TEST/
CHARGE] CHARGE] lamp is lit.
The control panel backlight lights for about 15 seconds.
[BACK
≥ If the flash is fired when the backlight is lit, it turns off.
LIGHT]
To turn the backlight on again, press the [BACK LIGHT] button.
Control operation
The flash can be fired remotely in sync with any
flash fired by other units.
[SL AUTO]: Flash level is set automatically.
[SL MANUAL]: The flash fires at the selected guide
number.
The flash can be fired many times in succession
while the shutter is open. ("Multi Flash Mode" (P12))
Function Use
Press [ ] (2) or [ZOOM]
1
(4).
Rotate the dial to select the
2
value, and then press the
[OK] button.
Before shooting, set the
1
LED light to [M].
"Other Settings" (P15)
Press [ ] (1) to turn the
2
LED light on. Press [
again to turn the LED light
off. To view the LED
brightness setting, press
and hold [ ] (1) for
2 seconds while the LED
light is on.
≥ The flash and batteries may
become warm if you keep the
LED light on, but this is not a
malfunction.
] (1)
11
VQT5F44