LUND Interceptor Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-5863.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
1
Installation Instructions
Interceptor
Bugflector
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
Raise hood.
- Interceptor II
™
Fastner x4
Clean Towel
Locate 4 holes on underside of hood that align with the holes in hood
shield and clean to remove any dust or debris.
2
Page 1 of 2
I - Sheet Number LUNDBF18 Rev.A
™
Bump On x4
Phillips Screwdriver