BlueBuilt 933695 Mode D'emploi page 4

3. EXPLANATION OF THE PORTS
Connect a device with USB-C, such as a data cable 2/3.
Place an SD or microSD card in the (micro) SD slot
Connect a device with a 3.5mm jack, such as headphones 7.
Connect an Ethernet cable to the Ethernet port 8. The docking station
supports a speed of up to 1000Mbps. To reach this speed, you use a
Category 5e (Cat5e) Ethernet cable or higher.
6
to read your data.
6
9/10
The HDMI connector for viewing your screen on an extra monitor or
projector only works if your laptop supports DisplayPort Alternate Mode
or Thunderbolt 3 or 4 technology. View the manual of your laptop for more
information.
Connect a USB device, such as a mouse, keyboard, or USB flash drive
4/11/12.
You can only achieve the maximum resolution of 4K at 60Hz if your
laptop supports DisplayPort 1.4 via alternate mode via the USB-C port and
if you download the DisplayLink ®
program. For more information, check the manual of your laptop.
Note: the docking station only works with HDMI cables. HDMI to
DisplayPort cables are not suitable.
software. Scan the QR code for the right
7