Danby DPF074B2WDB-6 Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the cover plate on the top left side of the
cabinet. Remove the hinge cover and the upper
hinge from the top right side of the cabinet.
Remove the freezer door from the cabinet.
2. Remove the hinge hole cover from the top left
side of the door and install it on the top right
side of the door.
3. Remove the center hinge. Remove the
refrigerator door from the cabinet.
4. Remove the screw hole covers from the left side
of the cabinet and install them on the right side
of the cabinet.
5. Remove the adjustable foot from the lower left
side of the cabinet. Remove the hinge from the
lower right side of the cabinet.
5