Publicité
Les langues disponibles
Les langues disponibles
Operation
Preparing for Use
Before first use, please charge the appliance for 4-5 hours (refer to "Charging Instructions" for details).
* Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C).
Press the
button and the appliance will start
in AUTO mode by default. Press it again to turn
off the appliance. Switch between AUTO, MAX,
ULTRA and SUCTION modes by pressing the
button.
Stop Working
The appliance will stop working when put upright
and start running again when reclined.
* Do not recline more than 142° to avoid water
leakage.
Note:
• Selecting the appropriate mode depending on the CWT contents is vital for maximum dirt detection
effectiveness.
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the appliance will keep running for 3 seconds after power off.
Start Again
Tips: (SUCTION mode not available)
• Solution mode/Water Only mode:
Appliance starts with Solution mode by
default. Power on while the appliance is
upright, long-press
between the two modes.
• Switch to Water Only mode:
LED Loop: Red → Blue (use water only)
• Switch to Solution mode:
LED Loop: Blue → Red (use cleaning solution)
Place the appliance on the charging dock
vertically after use for recharge and storage.
10
for 3s to switch
Publicité
