INFOSEC UPS SYSTEM S USB NEO Notice D'utilisation page 6

This surge protector is designed to protect your home / office equipment.
Its 2 USB chargers can charge many types of mobile devices (smartphones, tablets ...).
Safety instructions
Please read all the instructions before setting up the S1 USB NEO.
It must be installed indoors in a safe location where the temperature and humidity do not
exceed the limits stipulated in the specifications section.
In addition to this type 3 surge suppressor, the NFC 15-100 standard in France requires the
installation of a type 2 (or 1) modular surge protector at the origin of your electrical system
in the departments where the lightning intensity is greater than 25 (number of thunderstorm
days per year).
Please contact the hotline for details.
Installation
 Connect the
 Turn the master power switch to the "ON" position.
 Plug your equipment to be protect into the outlet of the S1 USB NEO
 Plug your mobile devices to the 2 USB chargers of the S1 USB NEO
If there is a problem, do not disassemble the S1 USB NEO, there are no reparable
parts inside. Please contact the After-Sales Service (Hotline).
Legend of the scheme
1 >
Protection indicator
Green "Protected" light on: the equipment is protected against overvoltage and
lightning.
Green "Protected" light off: no protection – Please contact the Hotline
2 >
USB chargers
Plug in your mobile devices to charge them (tablets, mobile phones, or power
banks). The total power is 10.5W (up to 5V/2. 1A).
3 >
French outlet with child protection
4 >
Non-flammable plastic housing
6
INFOSEC UPS SYSTEM 15, rue du Moulin 44880 SAUTRON - France - www.infosec-ups.com
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 03 18 AA 08 204 28
into a grounded 2-pin wall outlet (2P + E - 16 A).
S1 USB
User Guide