Uline H-11271 Mode D'emploi

H-11271, H-11272
H-11273, H-11274
PALLET RACK
SAFETY STRAP
• Failure to comply with these instructions may result
in load damage and personal injury or death.
• Inspect assembly before each use.
• Inspect whether the clips stamped with "L" or "R"
have been installed correctly and fully engaged to
function properly before each use.
• Webbing should not be used if any signs of burning,
melting, cuts, fraying or abrasion of fibers or
alterations are present.
• Hardware should not be used if any signs of
damage, deformation or alterations are present.
• Protect the webbing and other product
components from sharp edges, abrasion, hot
surfaces and/or corrosive materials. Inspect this
product regularly for signs of deterioration and/
or damage. If any sign of deterioration and/or
damage exists, remove this product from service
and destroy it immediately.
• Product is not designed to be load-bearing. It is
designed to limit unwanted material movement
and prevent objects from falling. Placing loads on
any portion of its structure may result in product
failure, leading to an unsafe condition.
• Product is not designed to lift, suspend, tie down
or restrain loads of any size or weight. Using this
product in such a manner may result in an unsafe
condition.
PAGE 1 OF 6
1-800-295-5510
uline.com
SAFETY
• Product is designed for use on industrial pallet
• At least two pallet rack safety straps should be
• Never attempt to climb on, up, over or through
• Hand trucks, motorized equipment and ladders
• Prior to installation, confirm materials on storage
• Installation of this product may involve working
• Refer to federal, state or provincial regulations for
Pour le français, consulter les pages 5-6.
storage racks. Installing this product on any
other type of equipment may result in an unsafe
condition.
used on one pallet storage rack.
the product for any reason, including installation.
Doing so may result in an unsafe condition.
should not come in contact with straps.
racks are centered and do not extend or hang over
the storage rack edge.
at heights above ground level. In such instances,
strictly follow the elevation/lift system(s) instructions
when working at elevated heights.
proper strap methods.
Para Español, vea páginas 3-4.
0224 IH-11271