Homelite UT44175 Manuel D'utilisation page 8

 Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way.
Take it to an authorized serviceman for electrical check
to determine if the charger is in good working order.
 Do not disassemble charger. Take it to an authorized
serviceman when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
 Unplug charger from outlet before attempting any
maintenance or cleaning to reduce the risk of electric
shock.
 Disconnect charger from the power supply when not in
use. This will reduce the risk of electric shock or damage
to the charger if metal items should fall onto the connector.
It also will help prevent damage to the charger during a
power surge.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
1.
This manual contains important safety and operating instructions for battery charger WBS002B108U018.
2.
Before using battery charger, read all instructions and cautionary markings on battery charger, battery, and product
using battery.
3.
CAUTION!
To reduce the risk of injury, charge only UT44175. Other types of batteries may burst, causing personal
injury or damage.
SAFETY RULES FOR CHARGER
Page 6 — English
 Disconnect charger from tool when the battery is fully
charged.
 Risk of electric shock. Do not touch uninsulated portion
of output connector or uninsulated battery terminal.
 For best results, your battery tool should be charged in
a location where the temperature is more than 50° but
less than 100°. To reduce the risk of serious personal
injury, do not store outside or use in vehicles.
 Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also
to prevent misuse of the product and possible injury.