hawa Junior 120/GP Instructions De Montage page 4

HAWA-Junior 120/GP
English
Intended use
Sliding door fitting for all-glass sliding doors with top fixed suspension.
Intended place of use
Dry internal areas and internal areas where condensation can occur: for instance in kitchens or bathrooms, but without any
significant occurrence of chloride.
Technical data
Max. door weight
Glass thickness sliding door ESG
Glass thickness sliding door VSG
Glass thickness fixed glass: ESG/VSG 8–12 mm ( "- "), with silicone up to 13 mm ( ")
Both fully tempered monolithic safety glass and fully tempered laminated safety glass can be used.
All glass edges are seamed; 1 mm ( ") x 45° in the glass cutout.
Fully tempered laminated glass permissible with max. offset of 2 mm ( ") in the glass cutout.
ESG Fully tempered monolithic safety glass with a minimum surface compression of 15,000 psi (DIN EN 12150-1)
VSG Fully tempered laminated safety glass according to DIN EN 14449
Certificates are available for downloading at www.hawa.ch.
Article number
Articles are identified by a 5-digit number.
General notes
The document «Safety Notes» (22991) is an integral part of these planning and assembly instructions.
The operating instructions, the planning and assembly instructions and the document «Safety notes» (22991) must be handed over to
the end user of powered systems.
Metric measurements apply - those in inches are for information only.
Retain the instructions. Replacements available from www.hawa.ch.
Risk and residual risk
The hardware does not pose a risk or residual risk.
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
4
120 kg (264 lbs.)
8/10/12/12,7 mm ( "/ "/ "/ "), thickness tolerance ± 0,3 mm
2x4 ± 0,2 mm ESG
2x5 ± 0,2 mm ESG
2x6 ± 0,2 mm ESG
5 15
---- - ---- -
16 32
1
---- -
16
5 13 15 1
---- - ---- - ---- - - -
16 32 32 2
→
film thickness 0,38 / 0,76 / 1,52 mm
→
film thickness 0,38 / 0,76 / 1,52 mm
→
film thickness 0,38 / 0,76 mm
17
---- -
32
3
---- -
32