Publicité
now you can Set off on your traVelS
1
Avoid continuous running. Allow the motor to cool down approxi-
mately 30 minutes after running.
Attention!
Switch on transmitter first, then switch on RC model. Make sure to
follow this order when turning on your RC model.
cautIonS when oPeratIng the rc model
3
200g
4
2
Never run the model on public roads or streets, as it could endan-
ger traffic.
• Never run the model in crowded areas, near or toward people
or animals, to prevent property damage and/or personal injury.
• Never run the model on grassland. Twining grass may hinder
axle rotation and may cause motor heat buildup.
• Never run the model near rivers, ponds or lakes as to prevent
RC model from dropping into the water.
The forks can be loaded with a maximum weight of 200 g.
Never exceed this weight as overloading the model will damage
the mechanism and drive unit.
19 // gb
Publicité
