Télécharger Imprimer la page

Velleman VTLAMP2WN8U Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

Familiarize yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorized way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
4.
Contents and Assembly
Refer to the illustration on page 2 of this manual.
1. Take the lamp and the clamp out of the packaging.
2. Secure the clamp [1] tightly to a solid surface capable of carrying it.
3. Remove the screw [2] from the clamp [1].
4. Insert the stem [3] into the clamp [1] and secure it by fastening the screw [2].
5. Insert the power plug [4] into a power outlet.
6. Switch the lamp on by means of the switch [5].
5.
Replacing the lamp
1. Unplug the device and let the circular fluorescent lamp cool down before replacing it.
2. The lamp [6] is located behind a plastic diffuser [7] and is held in place by three metal clamps.
Remove all screws that hold the plastic diffuser in place and gently remove the diffuser.
3. Carefully take the defective lamp from the clamps and remove it.
4. Install a new lamp by connecting it and securing it in the metal clamps.
5. Put the diffuser back and fasten its screws.
Caution: If the plastic diffuser is damaged, disconnect the lamp immediately from the mains. The diffuser is
not replaceable. Do not use the lamp with a cracked or broken diffuser.
6.
Technical Specifications
diopter
color
light color
color temperature
energy consumption Ec
intensity
power consumption
power supply
spare magnifying glass cover
dimensions:
Use this device with original accessories only. Velleman Inc. cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.vellemanusa.com. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE – The copyright to this manual is owned by Velleman Inc. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic
medium or otherwise without the prior written consent of the copyright holder.
V. 03 – 07/10/2014
VTLAMP2WN8U
8 (magnification 3.0x)
white
cold white
> 6400 K
22 kWh/1000h
1050 lm
22 W
110 Vac / 60 Hz
VTLAMP2WN/SP1
arm length: ± 41.34 in / 105 cm
width: ± 9.45 in / 24 cm
height: ± 2.36 in / 6 cm
glass: Ø ± 4.72 in / 120 mm
3
©Velleman Inc.

Publicité

loading