Dynamic Range Compression - AudioSonic DV-1821 Mode D'emploi

2. speaker setup page:
• Down mix setup
• RIGHT/LEFT Channel: mix the 5.1 channel audio to the left/right channels and
then output by the left and right speakers.
• Stereo: Mix the 5.1 channel audio to stereo and then output by left and right speakers
• Note: This function can only be used on AC-3, 5.1 channel format discs.
3. spDiF setup (on devices with spDiF)
3.1 spDiF output.
• SPDIF /CLOSE: No digital audio output, only analogue output.
• PCM (Pulse Control Modulation) - Two channel stereo in digital format -suitable
for AV receivers capable of decoding audio output in PCM mode (check with your
amplifier).
4. Dolby setup.
4.1 Dual mono.
• Stereo: Left/Right channels will output by Left/Right speakers
• Left Channel: Left/Right speaker output Left channel audio
• Right channel: Left/Right speaker output Right channel audio
• Mixed channel: Left/Right speakers output the Left/Right mixed audio
• Note: This function suits to Dolby AC-3 or Two channel discs.

4.2 Dynamic range compression:

• To listen to a disc at low volume, you can adjust the dynamic balance to reduce sound.
5. Video setup:
5.1 panel Quality: to setup the panel quality
5.2 Video Quality: to setup the video quality
6. the initial set page:
• You can choose this setting when the machine has no disc inside or is on STOP
8
position.
Instruction Manual
6.1 sound, subtitle and disc menu language.
This allows you to choose the default settings of the sound, subtitles and disc menu
language. At the same time, you can choose the sound language by pressing SOUND.
Note: If the disc does not include the above setting language, the disc will play it's
default setting.
6.2 age control.
The configuration settings of the machine allow the disc player to be set with a
password to restrict use of the machine. The default password is 136900.
Note: This function will only work with discs with an age control built in.
6.3 password setting.
6.4 password Format.
You can turn the password setting function on or off.
Note: You have to input the correct password to change the password setting. The
default password is 136900.
6.5 password.
You can re-set a new password. Note: The default password 136900 is still valid even
after a new password has been set.
6.6 Default: you can return to the current settings to the original default.
Make sure you turn the machine off.
play the disc:
A: Connect the power and ensure unit is turned on.
B: Press [ ] to open the disc tray and insert a disc.
C. Close the disc tray. The machine will read the disc automatically.
play mp3/mpeG4 disc:
The content will be displayed on the screen after reading the MP3/MPEG4 disc.
1. Press the UP/DOWN arrow keys to select the file or folder.
2. Press OK or CONFIRM to enter the selected folder and display it's contents.
3. Press OK or CONFIRM to play the selected file.