Caratec Vision CAV327DSW Notice D'utilisation page 50

3. Set-Up and Use
3.1. Assembly
Stand Assembly
1. To avoid damage, place the screen on a soft flat surface.
2. Attach the stand to the underside of the television set by means of the four
screws provided.
Wall Bracket Assembly
1. Attach the wall bracket to the wall.
2. To avoid damage, place the screen on a soft flat surface.
3. If necessary, remove the stand.
4. Attach the television set to the wall bracket by means of the VESA mounting.
50
Screws
Screw holes A
Screw holes B
Screw holes C
Screw holes D
Screws