Télécharger
Partager
Imprimer la page
Delta 4575 Serie Mode D'emploi
  1. Manuels
  2. Marques
  3. Delta Manuels
  4. Produits de plomberie
  5. 4575 Serie
  6. Mode d'emploi
Delta 4575 Serie Mode D'emploi

Delta 4575 Serie Mode D'emploi

Robinets de style "a entraxe long" a deux poignees pour lavabo standard
Masquer les pouces
1
2
3
4
5
6
7
8

Publicité

Liens rapides

Télécharger ce manuel
U P
®
C
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
NSF-61
ICC/ANSI A117.1
Model/Modelo/Modèle
4575 Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
T E FLO N
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
®
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
3/32" (2.38mm)
US. Pat. 3,645,493, 3,786,995, 4,523,604, 4,562,960, 4,593,430, 4,218,785, 4,577,653, 4,765,365
TWO HANDLE MINI-WIDESPREAD
LAVATORY FAUCETS
LLAVES DE LAVAMANOS DE DOS MANIJAS
DE MINI-EXTENSIÓN
ROBINETS DE STYLE "À ENTRAXE LONG" À
DEUX POIGNÉES POUR LAVABO STANDARD
T E FLO N
1
L
10/6/08 Rev. C

Publicité

loading

Manuels Connexes pour Delta 4575 Serie

Sommaire des Matières pour Delta 4575 Serie

  • Page 1 • To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
  • Page 2 & repair. OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves This warranty excludes all industrial, commercial & business usage, whose purchasers are defective in material and/or workmanship under normal installation, use & service. Replacement hereby extended a five year limited warranty from the date of purchase, with all other terms of parts may be obtained by calling 1-800-345-DELTA (in the U.S.
  • Page 3 RP43169▲ H278▲ Lift Rod Finial Pomo de la barra de alzar Grain de la Tirette RP41588▲ Lift Rod Barra de Alzar Tige de Manoeuvre RP26148 Bonnet Nuts RP51345 Bonetes/Capuchones Aerator RP41896 Chapeaux filetés Aireador Glide Ring Aérateur RP24097 Aro para Deslizar L’anneau de Glissement 1/4 Turn Stop Parada (Tope) a un 1/4 de...
  • Page 4 F R O N T FRO NT FRON T Step 1 3750015 Remove "umbrella" (1) and be sure snap rings seat in bases (2). Install Insert body (1) through sink and snap into place using plastic "umbrella" (2). NOTE: The front of the valve is labeled (3). gasket (3), base (4), and spout (5).
  • Page 5 1/2" (12.7mm) IPS Choose hook-ups for 1/2" I.P.S. connections: (1) Ball nose riser (3/8" O.D. copper tubing), or (2) 1/2" I.P.S. faucet connector Install the handles (1). Be sure glide ring (2) is properly seated in Use the enclosed coupling nuts (3) with the ball nose risers (1). bottom of handle before installing.
  • Page 6 Pop-Up with Metal Flange and Plastic Tail Piece With pivot (1) facing toward faucet, pull Remove stopper (1), brass nut & washer (2), Remove pivot nut (1). Install horizontal rod pop-up straight down into drain hole and black gasket (3) and tail piece (4). (2) and stopper (3) as removable (4) or secure gasket (2), brass nut and washer non-removable (5).
  • Page 7 Step 3b Step 3e Step 3c Metal Pop-up Remove pivot nut (1). Install horizontal rod (2) and Apply silicone to underside of flange (1). stopper (3) as removable (4) or non-removable (5). Insert body (2) into sink. Screw flange (1) Remove stopper (1) and flange (2).
  • Page 8 Maintenance Remove aerator (1) using supplied wrench (2) and turn faucet handles (3) to the full on mixed position. Turn on hot and cold water supplies (4) If faucet leaks from spout outlet–Shut off water supplies– and flush water lines for one minute. Important: This flushes away any Replace Seats and Springs (1).* debris that could cause damage to internal parts.