essentiel b MS-E-200-D Notice D'utilisation page 18

INSERTING BATTERIES INTO THE REMOTE CONTROL
1.
2.
3.
The remote control works with 2 x AAA LR03 1.5 V batteries.
•
We recommend using only alkaline batteries.
•
Remove the batteries from the remote control if you are not going to use it for a while (more than a
•
month).
Used batteries must be disposed of safely. Place them in environmentally-friendly collection bins.
•
USING THE REMOTE CONTROL
Aim the remote control at the infrared sensor on the front of the mini-stereo at an angle of 60° so that
•
the mini-stereo receives the transmitted information.
The range of the remote control is 8 meters.
•
Make sure that there are no obstacles between the remote control and the infrared sensor and that
•
sunlight or other light sources do not reflect on it.
34
V.1.0
your product
Open the cover on the back of the remote control.
Place the batteries in the compartment, observing the
indicated + and - polarity.
Replace the cover.
instructions for use
BEFORE USING THE DEVICE FOR THE FIRST TIME, PLEASE READ THESE SAFETY INSTRUCTIONS
CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE.
Safety instructions
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT OPEN THE
APPLIANCE
Users should not attempt
repair or replace any part of this device. Repairs
and maintenance must be carried out by qualified
personnel. Any disassembly of the appliance will
void the warranty.
A lightning symbol inside
equilateral triangle warns users about
the presence of uninsulated high
voltages inside the appliance with a
sufficiently high current to present an electrical
discharge risk to individuals.
An exclamation mark inside an
equilateral triangle informs users of
important operational or maintenance
safety instructions (routine maintenance) in the
instructions for use provided with the appliance.
Check that the supply voltage on the appliance's
•
data plate is compatible with your electrical
installation.
Do not use this appliance:
•
1. if the power cord is damaged,
2. if it is not functioning correctly,
3. if the device has been in any way damaged.
Plug the power cord into an easily accessible
•
power outlet.
Make sure the power cord cannot be crushed
•
or trapped, especially around the plug, power
outlet and where it is connected to the appliance.
This appliance is only intended for indoor use.
•
Ensure that you install the appliance on a flat
•
and stable surface (avoid placing it on fabrics or
carpets in particular).
Do not place this appliance near a source of
•
heat, such as radiator, a hot air vent, an oven
or any other appliance (including amplifiers) that
produces heat.
Do not expose the appliance to direct sunlight
to •
or dust.
Do not use this device near water or places
•
where moisture may be present, such as a bath,
washbasin, kitchen sink, near a swimming pool,
in a damp basement or any other damp location.
Do not place anything that produces a naked
an •
flame (a lighted candle for example) on or near
the appliance.
Do not splash or spill liquid of any kind on the
•
appliance, and do not place objects filled with
liquids (such as vases) on the appliance.
Adequate ventilation of at least 10 cm around
•
the appliance is necessary to ensure good
ventilation.
Do not install this appliance in a restricted
•
space such as a bookcase, behind curtains, etc.
in order to allow sufficient ventilation.
Do not open the appliance for any reason.
•
Never use sharp objects to access the inside of
•
the appliance.
The appliance must be plugged into a power
•
outlet. The power cord must remain accessible
after the appliance is installed.
Unplug this device during storms, or if it is not
•
going to be used for a long period, to avoid
damage.
The appliance must be switched off before
•
unplugging the power cable.
V.1.0
instructions for use
35