Zephyr Presrv PRW24C02CG Guide D'utilisation, D'entretien Et D'installation page 16

Installation Instructions
Installation Clearance Requirements
When installing the wine cooler under a counter, follow the recommended spacing dimensions shown.
For proper clearance of the electrical plug, allow at least 1" of clearance at the back as shown in
the diagram.
An installation next to a wall will require a minimum 2-1/4" door clearance to accommodate the
Zephyr handle.
The cabinet should allow at least 24" for the width and 34" for the height to accommodate the
wine cooler.
The power cable is located on the back right of the unit and has a length of 72" to accommodate
multiple outlet locations.
Once you are ready to install the unit, you must adjust the feet to level the wine cooler.
This refrigerator can be fully built-in to cabinetry and does not require any additional clearances
besides what is referenced below.
The installation should allow the unit to be pulled forward for servicing, if necessary.
16 PRW24C02CG Use, Care, and Installation Guide
P R E S R V ™
W I N E C O O L E R
D U A L ZO N E