i-tec USB 3.0 METAL CHARGING HUB Mode D'emploi page 5

ENGLISH
INTRODUCTION
i-tec USB 3.0 Metal Charging HUB is an ideal companion
for everybody who does not have enough USB ports in his/
her notebook, ultrabook or PC and who has to constantly
connect and disconnect his/her favorite USB equipment
such as flash disks, mobile phones, tablets, digital cameras,
MP3 players, printers, etc.
This HUB offers 7 USB 3.0 ports with the Plug & Play function
and standard USB charging – the HUB will automatically
detect connected equipment for USB charging. The USB
3.0 interface is important mainly for data transfers from
USB 3.0 memory cards and flash disks which will use its
high transfer speed most.
The advantage is included external power adapter which
you can use for backing up data on external hard drives or
for connecting high power consumption devices which are
powered directly from the USB port.
This HUB does not require installation of drivers. You will
just connect it by the USB cable to your computer and
immediately you can start using it. This HUB has a built in
overcurrent protection of your computer in case of short
connection on the peripheries. The interface is compatible
with USB 2.0 / 1.1.
Thanks to its compact dimensions and low weight it is an
ideal companion to your notebook when traveling.
SPECIFICATION
• 7x USB 3.0 port for connecting USB equipment
• 1x USB 3.0 cable for connecting the HUB to a notebook / PC
• Transfer rate up to 5 Gbps
• USB charging detection mechanism for mobile devices
• Plug & Play function
• Overload and overcurrent protection
• LED diode
• Storage temperature -10~85 °C
• Working temperature 0-40 °C
• Power adapter: input AC 100-240 V, 50-60 Hz, 0.8 A;
output DC 5.0 V / 4.0 A
• OS Windows XP, Vista, 7 / 8 / 8.1 / 10 32/64bit, macOS X
10.x or higher
• Product dimensions 183 x 37 x 18 mm
• Product weight 116 g
Quick Start
| 5
ENGLISH