Télécharger Imprimer la page

Albert Lee UWN24C02BG Guide D'utilisation, D'entretien Et D'installation page 16

Publicité

Les langues disponibles

Les langues disponibles

Operating Your Appliance
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the appliance may
not start and will keep the last set temperature.
USING YOUR CONTROL PANEL:
This wine cooler has a temperature range from
Power Button
Press and hold this button for three seconds to power your unit on or off. While
the unit is on the R 'Compressor Running' light may illuminate to indicate the internal
compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is
the highest available temperature on this unit.
Decrease Temperature
Press this button to increase the temperature by one (1) degree increments. 40ºF is
the lowest available temperature on this unit.
Interior Light
Press this button to cycle through the different internal light settings. There are
three light settings: Cloud White, Deep Blue and Amber.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time to switch the
display temperature.
NOTE:
The wine cooler is equipped with a temperature memory function. If power is suddenly
lost, the previously set temperature will be saved and the cooler will return to this setting
once power is restored.
40ºF-65ºF.
16

Publicité

loading