Using The Appliance; Switching The Appliance On And Off - Philips Qp6520 Mode D'emploi

12
English
Charging in the charging stand (QP6520 only)

Using the appliance

Switching the appliance on and off

1 Insert the small plug into the charging stand
and put the adapter in the wall socket.
2 Put the appliance in the charging stand.
3 After charging, remove the adapter from the
wall socket and pull the small plug out of the
charging stand.
You can use the appliance to trim, edge or shave
facial hair (beard, moustache and sideburns).
Shave for a smooth result, trim to obtain a certain
length and edge to create perfect edges and sharp
lines. This appliance is not intended for shaving,
edging or trimming hairs on lower body parts or
scalp hair. Take your time when you first start to
use the appliance. You have to acquire practice
with the appliance.
Note: This appliance can only be used without
cord.
1 To switch on the appliance, press the on/off
button once.
2 To switch off the appliance, press the on/off
button once.