Automatic Mode; Manual Mode; Cleaning And Maintenance - Fanelite GF-7FN Mode D'emploi

Plug in the power cord to turn on the appliance.
The red indicator light on the touch screen will be on, which means the
product is connected well. At the same time, the green light sensor
indicator will be on, which means the unit is in automatic mode.

AUTOMATIC MODE :

The unit turns on at night or when the luminosity is low and turns off
during the day or when the luminosity is high.
Press the POWER ON / OFF button to adjust the fan speed, 3 different
speeds, high / medium / low, the indicator corresponding to the selected
speed lights up.

MANUAL MODE :

To switch to manual mode, deactivate the light detection function by
pressing the corresponding button (Moon / Sun symbols). The light turns
off and the device will operate at all times regardless of the surrounding
luminosity.
Press the POWER ON / OFF button to turn on the unit and adjust the
fan speed.
To turn off the unit, press the POWER ON / OFF button until the speed
lights go out.
Notes :
If you are not going to use your unit for a long time, we advise you to
disconnect the appliance from the AC power.
For maximum efficiency, place the unit on a table in a dark, quiet area.
When used at home, doors and windows must be closed and lights off.

5. CLEANING AND MAINTENANCE

WARNING : Before cleaning your appliance, carefully read the
safety instructions in this manual.
17