HIKVISION DS-D4215FI-GWF/III Guide De Démarrage Rapide page 4

2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive
2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste
in the European Union. For proper recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentation for specific battery information. The battery is marked
with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
Safety Instruction
You must carefully read the safety instructions before using and installing the product.
Warnings & Cautions:
This is a class A product and may cause radio interference in which case the user may be required to take adequate measures.
●
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
●
The equipment must be connected to an earthed mains socket-outlet.
●
Shock hazard! Disconnect all power sources before maintenance.
●
A readily accessible disconnect device shall be incorporated external to the equipment, rated 220/230/240 VAC, 6A for each device.
●
High touch current! Connect to earth before connecting to the power supply.
●
Ensure correct wiring of the terminals for connection to an AC mains supply.
●
The equipment has been designed, when required, modified for connection to an IT power distribution system.
●
Install the equipment according to the instructions in this manual.
●
To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions.
●
NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the equipment.
●
Install the device no more than 5 mm away from the wall or other metal racks.
●
This equipment is suitable for mounting on concrete or other non-combustible surface only.
●
Keep 90° when moving or using the equipment.
●
The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on
●
the equipment.
CAUTION: This bracket is intended for use only with LED display unit. Use with other equipment may result in instability causing injury.
●
CAUTION: This equipment is for use only with LED bracket. Use with other (carts, stands, or carriers) may result in instability causing
●
injury.
2
English