V-TAC VT-6307-2 Manuel D'instructions page 8

WIRELESS FUNCTION
STEP 1: Press the mode button on front panel to launch the bluetooth applica-
tion. This will show the Bluetooth logo show on the screen.
STEP 2: Toggle the Bluetooth switch on to activate. The device will automati-
cally begin to scan for nearby Bluetooth devices.
STEP 3: Tap "V-TAC VT-6307-2" on your list of devices. Depending on the
device you are trying to connect the speaker to, it may be necessary to enter
a pass code. Enter the default passcode "0000" if prompted by the device.
Then, wait for your device to be connected successfully.
STEP 4: Tap the entry for bluetooth accessory when it is detected by the smart
phone or computer and displayed on the screen. Then it can use bluetooth to
operate in conjunction with accessory.
INSTRUCTIONS
1. This unit uses a rechargeable battery. When the battery power is depleted,
please plug the device to an electric socket with the correct input voltage.
2. When the unit is charging, please make sure to switch on the AC/DC option,
then safely unplug when finished.
3. On first use, the battery must be charged for 10 to 12 hours.
4. The unit's battery working time lasts up to 2 to 4 hours, depending on the
usage.
ATTENTION
1. To maintain battery life, please charge the battery every time the power is
completely depleted. Damage may occur if the battery is not charged for longer
periods, so please use and charge the battery at regular intervals.
2. Our company reserves the right to update the product without any notice.
3. If you have any issue with the product, kindly contact a professional technician.
Do not open the unit yourself.
4. For safety reasons, keep the device away from children.
ENGLISH