Costway KC54240 Manuel De L'utilisateur page 2

Before You Start
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
02
Parts List
A x4 B x1
Legs Seat
ASSEMBLY INSTRUCTION
1. Check all parts and fittings.
2. Put Plastic washer (C) into the holes in
the seat.
3. Tighten the legs with full power (Fig. 2)
through the plastic washer to ensure the
strength of the construction.
Fig. 1
IMPORTANT
Use full power to screw the legs.
If the chair is wobbling, use additional
Plastic washer (C) for correction flatness
of the legs to the ground.
Fig. 2
x6
C
Plastic
washer
03