Xylem WTW Cond 3110 Mode D'emploi page 5

Cond 3110
Status display
indicators
Socket field
connections
Initial
commissioning
ba75783y03 05/2017
AR Stability control (AutoRead) is active
ARng Automatic range switchover; meter measures with
highest possible resolution
Cal Calibration
LoBat With battery operation: Batteries almost empty
nLF Nonlinear temperature compensation
TP Temperature measurement active
Tref20 Reference temperature of 20 °C
TRef25 Reference temperature of 25 °C
TIME Setting of calibration interval
2 1
1 Conductivity measuring cell
2 Service interface
Insert the supplied batteries.
1
When doing so make sure that the poles of the batteries are
positioned correctly.
Switch on the meter with the <On/Off> key.
2
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD and on
the Internet under www.WTW.com.
EN
English
5