Publicité
Les langues disponibles
Les langues disponibles
Installation steps
1.
Press the 4 rubber feet into
the holes provided on the
underside of pedestal foot
bracket (14).
2.
Position foot (12) in pedestal
foot bracket (14) and secure
from below with two screws.
3.
Loosen mounting nut (5) from
motor shaft (8).
4.
Push rear protective grille (7)
over motor shaft (8) and
position firmly against motor
housing (9).
5.
Push mounting nut (5) onto
the motor shaft,
6.
Tighten the mounting nut in
clockwise direction.
7.
Push fan vanes (4) onto
motor shaft (8).
8.
Fasten the hinge cap to front
protective grille (2) with the
three screws.
9.
Hook front protective grille
(2) into retaining hooks (6) of
rear protective grille (7).
10.
Screw fixing screw with nut
into appliance (3) to connect
the front and rear protective
grille halves.
11.
Tighten the fixing screw.
Setting up the appliance
•
Assemble the appliance as
described in the installation
instructions.
•
Set up the appliance at a
distance of at least 50 cm from
other objects (curtains, walls,
spray cans).
•
Place the appliance on a firm,
level surface.
Electrical connection
RISK OF ELECTRIC
SHOCK!
A faulty electrical installation or
excessively high mains voltages can
result in electric shocks!
Connect the fan to a properly
installed plug socket with earthing
contact only when the mains power
supply voltage of the plug socket
corresponds to the data on the type
plate.
RISK OF ELECTRIC
SHOCK!
Water must never be allowed to
enter the appliance.
Do not touch the appliance with wet
hands.
9 Operating functions
APPLIANCE DAMAGE
Improper handling can result in
damage to the appliance.
Switching on the fan
Check before using for the first time
that the mains power supply voltage
corresponds to the voltage indicated
on the appliance type plate.
1.
Switch on the fan with
button "3".
2.
Select speed level 1 to 3.
EN
Page | 23
Publicité
