Télécharger Imprimer la page

Beko BSSA200M3SN Notice D'utilisation page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5
Using your refrigerator
Thermostat setting button
The operating temperature is regulated
by the temperature control.
Warm
1
2
(Or) Min.
1 = Lowest cooling setting
(Warmest setting)
5 = Highest cooling setting
(Coldest setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of foods kept inside.
Frequently opening the door causes
the interior temperature to rise.
Cold
3
4
5
Max.
12
For this reason, it is recommended to
close the door again as soon as
possible after use.
The interior temperature of your
refrigerator changes for the following
reasons:
• Seasonal temperatures.
• Frequent opening of the door and
leaving the door open for long
periods.
• Food put into the refrigerator
without cooling down to the room
temperature.
• The location of the refrigerator in
the room (e.g. exposing to
sunlight).
• You may adjust the varying interior
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
• If the ambient temperature is
higher than 32°C, turn the
thermostat button to maximum
position.
• If the ambient temperature is lower
than 25°C, turn the thermostat
button to minimum position.
EN

Publicité

loading