Impecca DFM-1514 Mode D'emploi page 7

BASIC OPERATION
Installing your unit
 Open the package and remove the protective foam. Remove the protective sleeve from the unit.
 Install the Digital Picture Frame stand at the back of the unit.
 Plug in the DC adapter into power outlet. Plug the other end into the unit.
 Insert the media that contains your files, such as USB Flash Drive or SD Card into the correct slot.
 Turn power to ON position via the ON/OFF switch at the back of the unit. After you have turned
the power switch on, you can use the Remote Control to power on/off.
Using Cards:
To insert a card, push the card firmly into the slot until it clicks into place.
IMPORTANT: Do not insert a micro or mini memory card without an adapter.
To choose a USB drive or SD card, from the main menu, pres the "Back"
be on the top row of icons. Use the left and right arrow keys to select your desired drive and press
"Enter." Note that you cannot select a drive if there is no device of that kind inserted in the frame.
Mounting your Digital Photo Frame to a Wall
Use 3 mm (1/8 inch), or larger, wall-anchoring hardware (not included) to anchor your frame securely
to your wall. To change to portrait , turn your frame 90° and use the wall mounting holes at the top.
Connecting to a PC or other device
The Digital Photo Frame has a USB port and a Mini-USB port for connection to a PC and other devices
such as a Flash Drive, USB card reader, or a camera (USB Host). When connected to the PC you can
drag-and-drop content from the PC to the internal memory or your memory card. You can also
delete content from the internal memory.
NOTE: USB port and mini-USB port cannot be used at the same time.
Main Menu
The Main Menu can be set to open upon startup. You can also access the Main Menu at any time by
pressing the Function button
From the Main Menu, use the left, right, up, or down arrows on the remote control to select one of the
options. Press the Enter button to confirm.
on the remote control.
- 7 -
button. You will now