Publicité
Preparing your modem
1.
Unplug the power cable/DSL modem. If it has a
battery backup, remove the battery.
NOTE: If you are using DSL for Internet,
you will need your username/password
from your Internet Service Provider (ISP) to
properly configure the router.
2.
Connect your modem to the router with the
bundled network cable.
3.
Power on your cable/DSL modem.
4.
Check your cable/DSL modem LED lights to
ensure the connection is active.
U15445-1_RT-N19_QSG_V2.indd 5
Unplug
5
2019/7/19 16:09:21
Publicité
