Publicité
Les langues disponibles
Les langues disponibles
6.4 Troubleshooting
Your appliance is provided with an overheating protection. When this protection has been activated you must
let your appliance cool down.
ADVICE
If overheating protection has been activated let your appliance cool down.
If your appliance does not start check the power cord.
The use of adaptors, multiple sockets and/or extensions is not recommended.
For any other anomaly contact your supplier.
ADVICE
Waste Electronic and Electric Equipment
To avoid any abuse and dangers and to fit the rules of the concerned countries before disposing of the used
appliance you must remove main electric cable.
7. IF OPERATING ANOMALIES OCCUR.
ANOMALIE
E0
E1
E2
ADVICE
These anomalies are indications. If you cannot solve the problem following these instructions, contact your
retailer.
CAUSES
> No pan on the plate or non-suitable
pan
> The temperature of the pan goes
up too much.
> Damaged part (ex. transistor).
> Overheating security goes on and
the appliance goes off.
> Short over voltage
18
EXPLICATION
> Change the pan for a suitable one
> Clean the ventilation opening let the
appliance cool down for few mn if the
message still contact your retailer.
> Contact your retailer.
.
> Putt the pan off the plate wait the
appliance cool down.
> Unplug the appliance wait the
appliance cool down
Publicité
