Télécharger Imprimer la page

VOLTCRAFT MSW 700 Serie Mode D'emploi page 26

Publicité

Les langues disponibles

Les langues disponibles

• Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
• Observe the operating instructions of all devices that are connected to the
inverter.
• If you are not sure about the correct connection or use of the inverter, or if
questions which are not covered by these operating instructions arise, please do
not hesitate to contact us or another qualified specialist.
b) Site of setup/installation
• Keep children away from the product. Choose the site of setup/installation so that
children cannot reach it. Children may try to stick objects into the device. There is
danger to life from electric shock!
• The product is only suitable for operation in dry, closed rooms. The entire product
must never become moist or wet. There is a fatal danger from electric shock!
• Choose a solid, flat, clean and sufficiently large surface for the product.
• For stationary installation, the product has two mounting brackets with two attach-
ment eyelets each. Use suitable screws and, if applicable, dowels for installation.
When drilling or tightening screws, ensure that no wires or lines are damaged.
• Avoid the following unfavourable ambient conditions at the site of setup/installa-
tion, during storage or when transporting:
- dampness or too-high humidity
- cold or heat, direct solar radiation
- dust or flammable gases, fumes or solvents
- strong vibration, impact or blows,
- strong magnetic fields such as those near machines or speakers
• Do not operate the product next to radiators, fans, air conditioning or similar.
Keep the product away from dust and dirt.
26

Publicité

loading