Publicité
Liens rapides
LED Flat Panel Ceiling Frame Kit Owner's Manual
COMPONENTS: Connectors, Screws, Frame
ASSEMBLING THE FRAME
STEP 1: Screw the connectors to the frame sections.
STEP 2: Connect frame sections to form 3 sides.
STEP 4: Slide the LED flat panel fixture into the channel.
(Channels that the LED fixture slides into.)
INSTALLATION INSTRUCTIONS
IMPORTANT: Read before installing. Retain for future reference.
STEP 5: Screw the 4th frame section onto the frame.
ITEM NO: 65-950, 65-951, 65-952
STEP 3: Secure
the 3 sided frame
assembly to the
ceiling making
sure it is perfectly
square, using
the appropriate
anchors for your
application (not
included).
Publicité
Manuels Connexes pour Satco NUVO 65-950
Sommaire des Matières pour Satco NUVO 65-950
- Page 1 ITEM NO: 65-950, 65-951, 65-952 LED Flat Panel Ceiling Frame Kit Owner’s Manual INSTALLATION INSTRUCTIONS IMPORTANT: Read before installing. Retain for future reference. COMPONENTS: Connectors, Screws, Frame ASSEMBLING THE FRAME STEP 1: Screw the connectors to the frame sections. STEP 3: Secure STEP 2: Connect frame sections to form 3 sides.
- Page 2 ESPAÑOL ARTÍCULO Nº: 65-950, 65-951, 65-952 Kit del Marco para el Panel LED Plano de Techo INSTRUCCIONES PARA LA INSTALACIÓN IMPORTANTE: Lea el manual antes de la instalación. Consérvelo para referencia futura. ENSAMBLADO DEL MARCO PASO 1: Atornille los conectores en las secciones del marco. PASO 2: Conecte las secciones del marco para formar 3 lados.