Lindy DST-Pro 101 Manuel Utilisateur page 4

User Manual
Specification
•
Host Interface: USB 3.2 / 3.1 Gen 1 / 3.0 (Type C), compatible with Thunderbolt 3/4
•
Connects up to 3 displays to your laptop using a DisplayPort and 2 HDMI connections
•
Max. resolutions (Windows):
o Single Display: 3840x2160 60Hz (DP or HDMI)
o Dual Display: 2560x1440 60Hz
o Triple Display: 1920x1080 60Hz
•
Max. resolution (Mac):
o Single Display: 3840x2160 60Hz (DP or HDMI)
o Multi-Monitor Display is not supported when using a Mac
•
4 Port USB 3.2/3.1 Gen 1/USB 3.0 5Gbps Hub: 3x USB Type A and 1x USB Type C
•
2 Port USB 2.0 480Mbps Hub: 2x USB Type A
•
Supports Gigabit Ethernet 10/100/1000Mbps
•
1x SD and 1x Micro SD slot
•
2x 3.5mm Audio port (1x in, 1x out)
•
Power requirements: 25W
•
Supports Power Delivery 3.0
•
Supported Audio: Supports Audio Stereo
•
Special Features: DisplayPort Alternate Mode, Supports MST for Windows, PXE (Preboot Execution
Environment) and wake on LAN (WOL) support, Supports MAC Address Pass-through (this feature
is dependent upon the compatibility of the hardware used in each set up)
•
Compatibility: USB Type C or Thunderbolt 3/4 equipped computers with DisplayPort Alternate Mode
support. Windows, macOS, Linux, Android, Chrome OS
Installation & Operation
Front:
•
5Gbps: Connect USB Type A devices (support up to 5Gbps)
•
: 3.5mm stereo output to connect a headphone or speakers
•
: 3.5mm stereo input to connect a microphone
•
SD/MicroSD: Card reader for SD and microSD cards
English