Publicité
Les langues disponibles
Les langues disponibles
GB
Contents
1
General hints .............................................................................................. 1
1.1
Installation .............................................................................................................. 1
1 General hints
• Only KERN KUP-adapters may be connected to the 15-pol-sub-
D-connection of the balance!
• Use the KUP adapter to transfer data from the device to a PC and
vice-versa.
1.1 Installation
1. Switch off the appliance
2. Plug in the interface adapter at the KUP connection
3. Switch on the appliance. The interface adapter is automatically recognized by the
appliance.
Communication parameters:
Communication parameters (baud rate, bits and parity) of balance and printer / PC
must match.
Interface: USB (factory setting)
Baud rate
Data bits
Stop bits
Parity
TYKUP-03-A-IA-def-2311
Interface Adapter with Cable for USB_Device/
Slave
Version 1.1 2023-06
Installation Instructions
9600
8
1
none
1
Publicité
