Geberit FLOWFIT Mode D'emploi page 4

Safety notes
CAUTION
Risk of injury caused by flying parts
▶ Do not exceed the maximum test
pressure.
▶ Ensure compliance with country-
specific regulations governing
pressure tests.
▶ Replace worn clamping rings and O-
rings.
Intended use
For monitored pressure tests of Geberit FlowFit
piping systems using the following test media and
test pressures:
• with cold water p
• with air p
max
4
= 25 bar/2500 kPa
max
= 3 bar/300 kPa
27021605370044811 © 03-2022
969.977.00.0(02)